"Mach den Hub Hub Hub" is a German phrase that roughly translates to "Make the hub hub hub" in English. The phrase is often used to encourage someone to get moving or to start something with energy and enthusiasm. It can be used in a playful or lighthearted manner to motivate someone to take action. **

No, Saint Nicholas is not the patron saint of thieves. He is actually known as the patron saint of children, sailors, and merchants. Saint Nicholas is widely celebrated for his generosity and kindness, particularly for his reputation of secretly giving gifts to those in need. The association of Saint Nicholas with thieves is likely a misconception or confusion with another figure. **

Yes, it is possible to use a different rotor than the SM-RT80 on the Shimano Saint HB-M800 hub. The hub is designed to be compatible with Center Lock rotors, so any Center Lock rotor from Shimano or other compatible brands should work with the hub. However, it's important to make sure that the rotor size and mounting system (Center Lock) are compatible with the hub to ensure proper performance and safety. Always consult the manufacturer's specifications and recommendations when choosing a different rotor for your hub. **

To remove a bicycle hub gear, you will first need to remove the rear wheel from the bike. Then, you will need to use a chain whip to hold the gear in place while using a cassette lockring tool to loosen and remove the lockring. Once the lockring is removed, you can slide the gear off the hub. Be sure to keep track of any washers or spacers that may be on the hub, as you will need to reinstall them when putting the gear back on. **

A defective bicycle hub gear system is a mechanical issue with the internal gearing mechanism of the bicycle's rear hub. This can result in the gears not shifting smoothly or skipping, making it difficult to maintain a consistent and efficient pedaling cadence. It can also cause the gears to slip or fail to engage properly, leading to a loss of power and control while riding. A defective hub gear system can significantly impact the performance and safety of the bicycle. **

The hub gear did not work for about a week. During this time, the gear was not functioning properly, causing inconvenience and disruption to the bike's performance. However, after a week, the issue was resolved and the hub gear started working again. **

Without physically inspecting the hub gear, it is difficult to determine if the thread is broken. However, signs of a broken thread may include difficulty shifting gears, grinding or slipping when pedaling, or visible damage to the gear mechanism. If you suspect the thread is broken, it is best to have a professional bike mechanic inspect and repair the hub gear to ensure safe and proper functioning. **

The SRAM hub gear may not shift into first gear due to several reasons. One possible reason could be that the shifter cable is not properly adjusted or is too loose, preventing the gear from engaging. Another reason could be that the internal hub mechanism is dirty or worn out, causing it to not engage properly. Additionally, there may be a problem with the shifter itself, such as a broken or worn out shifter mechanism. It is important to troubleshoot and diagnose the specific issue in order to properly address why the SRAM hub gear is not shifting into first gear. **